When makers say to replace chain, cassette and chainring together
Often the chain alone is enough. Sometimes it isn't. The makers quoted below say it depends on how far the wear has gone.
Why the answer isn't always "chain only"
Park Tool says it's far more expensive to replace your cassette than it is to replace a chain, so knowing when to replace the chain can save money.1 Shimano's Ben Hillsdon, quoted by road.cc, says the most important thing to change is the chain.2
If the chain is changed in time, the gears may be fine. If it's left too long, the gears can pay for it. Park Tool's warning is about running a chain past its wear limit.1
SRAM's Chris McKenney, quoted by road.cc, says chains, chainrings and cassettes all wear together. He says replacement costs can be high if a rider goes too long on one chain or doesn't clean and lubricate the drivetrain regularly.2
What happens when the gears are already worn
Wikipedia says that once the sprockets are worn past a certain point, skipping is liable to continue even after the chain is replaced.3 It also says replacing worn cassettes and chainrings after missing the chain replacement window is much more expensive than simply replacing a worn chain.3
SRAM's Chris McKenney, quoted by road.cc, says a new chain that skips under pedalling load is the sign the cassette is worn. He advises doing that test in such a way that a skipping chain will not injure the rider, and mentions a test ride in a car park.2 He is also quoted as saying a worn chain on a new cassette or chainrings will only accelerate the wear.2 That works the other way too: a new chain on very worn gears may not fix the problem.
What the makers say about timing
- Shimano: you can consider replacing the cassette or chainrings at the same time as the chain.2
- Not every time: road.cc says you don't need to change the cassette and chainrings every time you swap the chain. It says to check these other parts as soon as the new chain is installed.2
- SRAM: changes in tooth shape and skipping under load are signs the cassette needs replacing.2
A plain way to think about it
- Measure the chain. Measuring chain wear lists the makers' limits.
- If it's past the limit, replace it.
- Ride carefully, and watch for skipping, rough running or poor shifting. SRAM advises setting up any skip test so a skipping chain cannot injure the rider.
- If those show up on a new chain, the gears are the likely cause, and the makers' advice points to replacing them.
That's a summary of what the sources describe, not a repair procedure.
On an e-bike
Parts must match the speed count and the drive system. Your bike or motor maker's manual comes first. For which chains makers call e-bike rated, see what an e-bike rated chain is. To understand the gear side, see cassette and chainring wear.
If you aren't sure which parts fit, a bike shop or the bike's maker can confirm.
Sources used
- When to Replace a Worn Chain, Park Tool
- Are your chainrings and cassette worn? Here's how to tell when they need replacing, road.cc
- Bicycle chain, Wikipedia